3/4" Spigot Fixture Table Clamp
RKO's new line of spigot clamp is ideal for any level of fabrication with practicality in mind. The 140mm x 500mm x 3/4" Spigot fixture table clamp was carefully selected for its versatility and a desire to forgo multiple smaller clamps for just one! At over half a meter of clamping work space, it is the go-to tool for any structural or round tube clamping needs. This style of clamp is superior over the traditional C-clamps that tend to roll off round structures and require two hands. With a separating clamping cup it means a better service life, easier maintenance, and durability that will last you many years.
- Threads and clamp cup serviceable with dry lubricant (graphite powder). Due to the nature of work enviroment, the use of wet lubricants on threads and cups can cause premature ware.
- Reversable clamp arm for correction of spigot if overcranked. Remove the screw and flip the arm to the opposite side.
- Proper operation of the clamp is fully seated in the 3/4" hole with the shoulders of the clamp on the table. Adjust and turn hand tight without using any snipe bar or tool. If more clamping force is needed for securement, add more clamps.
- Max clamping force at full 500mm extension is 600LB
